伺服偏心压力机
SERVO ECCENTRIC PRESSES
伺服偏心压力机
TYPE MT
型号 MT
Eccentric presses with MEERtorque® drive unit
偏心压机配 MEERtorque® 驱动装置
The MT closed-die forging press is one of the latest generation of eccentric presses from SMS group. The MEERtorque® servodrive concept, newly developed from scratch, is the technical highlight of the press. The eccentric shaft and the flywheel are directly driven by dynamic torque motors.
MT系列热模锻压力机为西马克集团最新一代偏心压机，配有最新研发的MEERtorque®伺服驱动系统，偏心轴和飞轮由动态扭矩电机直接驱动。
The new drive system combines the advantages of (highly dynamic) servo presses with those of presses featuring a flywheel (high forging energy storage) and a conventional brake and clutch combination. This means the forging process is both highly energy-efficient and resource-friendly. The electrical energy generated during the deceleration phase can be used to recharge the flywheel. This reduces the operating energy demand by 30 - 50 %. Not only that, sound emission levels are much lower with the new drive concept.
最新的驱动系统将伺服压机的优势（高动态）与传统压机的飞轮优势（高能量储备）以及制动和离合系统完美结合，这意味着锻造工艺同时具有高打击能量和高效能。在减速阶段产生的电能可以用于补充飞轮的能量。全新的驱动系统有效的将运行能量降低了30%至50%，并且大大减少了设备噪音。
YOUR BENEFITS AT A GLANCE
优势：
• Greater energy efficiency through the recovery of the deceleration energy and avoidance of sliding friction losses
通过减速能量回收以及避免摩擦损失，获得了超高的能效
• High forging energy (flywheel) with low connected power
低输入功率获得了高锻造能量（飞轮）
• Substantially reduced maintenance costs and shutdowns as the drive unit is subject to almost no wear
大幅降低了维护费用和停机时间，驱动几乎无磨损。
• COST-EFFECTIVE PRODUCTION
经济型生产设备