西马克集团

SERVO ECCENTRIC PRESSES

伺服偏心压力机

TYPE MT

型号 MT

Eccentric presses with MEERtorque® drive unit

偏心压机配 MEERtorque® 驱动装置

The MT closed-die forging press is one of the latest generation of eccentric presses from SMS group. The MEERtorque® servodrive concept, newly developed from scratch, is the technical highlight of the press. The eccentric shaft and the flywheel are directly driven by dynamic torque motors.

MT系列热模锻压力机为西马克集团最新一代偏心压机，配有最新研发的MEERtorque®伺服驱动系统，偏心轴和飞轮由动态扭矩电机直接驱动。

The new drive system combines the advantages of (highly dynamic) servo presses with those of presses featuring a flywheel (high forging energy storage) and a conventional brake and clutch combination. This means the forging process is both highly energy-efficient and resource-friendly. The electrical energy generated during the deceleration phase can be used to recharge the flywheel. This reduces the operating energy demand by 30 - 50 %. Not only that, sound emission levels are much lower with the new drive concept.

最新的驱动系统将伺服压机的优势（高动态）与传统压机的飞轮优势（高能量储备）以及制动和离合系统完美结合，这意味着锻造工艺同时具有高打击能量和高效能。在减速阶段产生的电能可以用于补充飞轮的能量。全新的驱动系统有效的将运行能量降低了30%至50%，并且大大减少了设备噪音。

YOUR BENEFITS AT A GLANCE

优势：

• Greater energy efficiency through the recovery of the deceleration energy and avoidance of sliding friction losses

通过减速能量回收以及避免摩擦损失，获得了超高的能效

• High forging energy (flywheel) with low connected power

低输入功率获得了高锻造能量（飞轮）

• Substantially reduced maintenance costs and shutdowns as the drive unit is subject to almost no wear

大幅降低了维护费用和停机时间，驱动几乎无磨损。

• COST-EFFECTIVE PRODUCTION

经济型生产设备